Tel：+86-755-29498658
Detailed
Parameter
Product parameters: 1. Vacuum infusion room introduction:
Equipment body: using aluminum and aluminum alloy plate, etc
Mixed mode: dynamic mix
Vacuum pressure: freedom to set, perfusion vacuum chamber can be as low as for about 1 mbar
Deaeration function: all perfusion process under the vacuum state, eliminate air bubbles
Process of vacuum infusion: prevent the restaurant of the water vapor in the air cargo into products, vacuum betting guarantee potting materials do not contain air, completely fill the cavity of the product
Valve control: prevent the glue machine under a vacuum leak glue phenomenon
Vacuum pump: German vacuum pump, the suction flow 59 m3 / h (sv65b)
Full automatic: optional XYZ motion unit
Vacuum box: vacuum chamber size pallet size 400 * 500 * 500 * 500 mm 350 mm triaxial system: in a closed vacuum box moves, realize three-axis motion, the fixed (product) move above schedule;The vacuum degree in the negative 1 mpa.2. Glue supply system,
Control system: PLC control, touch screen display, parameters such as the quantity of glue, the glue speed setting;
Matching system: the double step motor accurately control the ratio of metering pump, the proportion is adjustable;
Hybrid system: dynamic way;
Cleaning system: gas and liquid two cleaning method, mixed automatic cleaning device and mixing transportation part;
Alarm system: the match by the high and low liquid level sensor material cylinder, short and full automatic alarm;With a stirring device, heating thermostatic device and vacuum deaeration function;
Solid proof: prevention and curing and stay, and fault alarm function;
Storage function: can store multiple sets of perfusion parameters, realize the perfusion, same product there is no need to edit parameters;Locate mode: automatic positioning device, ensure product positioning accuracy;
